China Ceramics Network News On June 1, 2019, the Ceramics Ceramics Ceramics Ceramics Ceramics Ceramics Ceramics Ceramics Ceramics Association was co-sponsored by the Guangdong Ceramics Association and the Foshan Ceramics Society and hosted by the Expert Committee of the Guangdong Ceramics Association. The second "Forum on New Materials, New Equipment and New Technologies in the Ceramic Industry" and the 2019 China (Foshan) Ceramic Equipment Manufacturing Advanced Technology Exchange Conference were held in the forum area of Hall 3 of Tanzhou International Convention and Exhibition Center. Leaders attending this conference include: Wu Yiyue, founding president of Guangdong Building Materials Association and chairman of China Ceramics Alliance, Chen Huan, president of Guangdong Ceramics Association, Feng Bin, chairman of Foshan Ceramics Society, and Xu, executive director of Foshan Ceramics Society. Ping, Zhang Boqing, director of the Mechanical Equipment Committee of the Ceramic Branch of the Chinese Ceramic Society, Huang Xinhong, former secretary-general of the China Ceramics Industry Association, Rao Pinggen, director of the expert committee of the Guangdong Ceramics Association and professor of South China University of Technology, Chen Zhenguang, secretary-general of the Guangdong Ceramics Association, Foshan Ceramics More than 200 guests, including Huang Bin, Secretary General of the Society, as well as management and technical personnel from ceramic production companies, related technology companies, and media reporters gathered together to witness the progress and progress of new materials, new equipment, and new technologies in the ceramic industry. develop.
▲Activity site
The theme of this forum focuses on the related fields of intelligent manufacturing in the ceramic industry, looking forward to the future ceramic manufacturing technology, discussing the construction of ceramic intelligent factories and the application of industrial robots, and at the same time, the application of new materials in Interpret innovative applications in ceramic products and production.
▲Activity site
Leader’s speech
▲ Huang Bin, Secretary General of Foshan Ceramic Society
▲Rao Pinggen, Director of the Expert Committee of Guangdong Ceramics Association and Professor of South China University of Technology
This forum was co-chaired by Huang Bin, Secretary-General of Foshan Ceramic Society, and Rao Pinggen, Director of the Expert Committee of Guangdong Ceramic Society and Professor of South China University of Technology.
▲Chen Huan, President of Guangdong Ceramics Association
At the beginning of the meeting, Chen Huan, President of the Guangdong Ceramics Association, said in his speech: Foshan International Ceramic Equipment and Materials Exhibition hopes to build a platform to better serve the current transformation and upgrading of the industry. Some problems and difficulties. Provide good services for the better and healthy development of the industry. Today's new technologies, new materials, and new equipment are for us to develop better through innovation, solve the difficulties and hot issues of high-quality development in transformation and upgrading, and reflect the wisdom of our Chinese people and our country through innovation in the development of world ceramics. The power of own innovation.
▲Xu Ping, Executive Chairman of Foshan Ceramic Society
Immediately afterwards, Xu Ping, executive director of the Foshan Ceramic Society, delivered a speech. He said: With the deceleration of global productivity growth, the "new manufacturing" promoted by new generation technology and improved productivity and economic growth ” has become a new pattern faced in manufacturing competition. The following "Industry 4.0", "Industrial Internet" and "Intelligent Manufacturing System" have also become new strategies for the world's manufacturing industry. In the ceramic industry, in recent years, innovations have been continuously introduced in the fields related to intelligent manufacturing. Automation and industrial robots have become the focus of the ceramic industry. At the same time, the application of new ceramic materials has also brought new highlights to the ceramic industry. In order to deeply discuss the new progress and existing problems in new materials, new equipment, and new technologies in the ceramic industry, exchange results and experiences in technological innovation, and better promote the scientific and technological progress of the industry. The Foshan Ceramic Society, which has always been committed to promoting scientific and technological progress and innovation in the ceramic industry, once again stood at the forefront of the industry and once again joined hands with the Guangdong Ceramics Association to organize this "New Equipment, New Materials, New Technology Forum for the Ceramic Industry", inviting the industry Experts, scholars and corporate technical elites compete on the same stage, aiming to explore the direction of scientific and technological innovation in the industry and promote the entire ceramic industryTechnology and equipment have risen to a new level.
▲Chen Zhenguang, Secretary General of Guangdong Ceramics Association
Next, Chen Zhenguang, Secretary-General of the Guangdong Ceramics Association, read out the decision to establish the organizing committee of the "New Materials, New Equipment and New Technology Forum for the Ceramic Industry". Secretary-General Chen said that the organizing committee will organize a forum on new materials, new equipment, and new technologies in the ceramic industry during the annual Foshan Ceramic Equipment and Materials Exhibition. The organizing committee will be chaired by Chairman Chen Huan of the Guangdong Ceramics Association and Feng Bin of the Foshan Ceramics Society. The chairman is the chairman, the executive director is Professor Rao Pinggen, director of the Expert Committee of the Guangdong Ceramics Association, the secretary-generals are Chen Zhenguang and Huang Bin, and the organizing committee members are senior experts from the industry and university scientific research institutions.
Expert Speech
During the forum exchange session, eight outstanding R&D directors from the ceramic industry and enterprises focused on the fields related to intelligent manufacturing in the ceramic industry, focusing on the construction of ceramic smart factories, the application of industrial robots, and future ceramic manufacturing technology. He gave a sharing speech on the latest progress in new equipment, new technologies and new materials in the development of ceramic industry.
▲Vice Chairman of Foshan Ceramic Society and President of Guangdong Keda Research Institute Wu Zhen
"Prospects for Future Ceramic Manufacturing Technology"
Wu Zhen mentioned in his speech: "In fact, the true understanding of intelligent manufacturing must start from the order, from the order to the delivery process. If it is all automated, we can say it is automated. Here The most important thing is to change the mind, and the management methods will undergo fundamental changes. " Dean Wu pointed out that the current intelligence and informatization of the ceramic industry are constantly advancing, and the management methods will undergo fundamental changes. This requires enterprises to take standards as the core, use intelligent equipment as a means, and use informationTurn into help. In the future, ceramic manufacturing technology will solve the problems of raw materials, kilns, and production equipment, and the system will solve the problems of human brain and computers, which requires the support of artificial intelligence and network.
▲Peng Hu, Chairman and General Manager of Hunan Yuanchuang Hi-Tech Industrial Technology Co., Ltd.
"Application of graphene materials in heating ceramic tiles"
Peng Hu shared the morphological characteristics, performance and application scope of graphene with the guests present. Mr. Peng said that graphene heating ceramic tiles are now concluded in various industries and are very popular. The application of graphene in the ceramic industry is mainly reflected in functional heating ceramic tiles, which is a simple superposition of ideas. For example, graphene heating Combining the flakes with traditional ceramic tiles creates graphene heating ceramic tiles, which is a very mainstream idea at present. In addition, construction and safety standards are very important. Heating ceramic tiles are no longer decorative materials. They are probably the largest electrical appliance in a household. We cannot think of ceramic tiles as just raw materials.
▲Application expert Zhang Yangfan, Factory Automation Department, Digital Industry Group, Siemens (China) Co., Ltd.
"Digital Twin - Application of Virtual Simulation Debugging in Back-end Logistics Equipment"
Zhang Yangfan mainly introduced the MCD mechatronics concept design, shared the value of MCD in virtual simulation debugging for equipment manufacturers, and provided new ideas for the automation of the ceramic industry, especially intelligent manufacturing. ideas. To ensure the quality of the product, many measurements can be made in advance, many possible accidents can be simulated, and then the reliability of the program can be ensured, which greatly improves efficiency. Zhang Yangfan mentioned when sharing: "MCD can also obtain the mechanical operating curve by simulating the motion process. After this operating curve is obtained, it can be imported into any of our Siemens software, such as scout and wave diagram. The software generates a library wheel curve. The generated library wheel curve is used for a control of machinery. The MCD virtual debugging target customer group is because this is a multi-disciplinary integration of design and debugging.Platform, on which we can improve existing products, develop new products, and even operate new technologies. ”
▲ Wang Zhifeng, Sales General Manager of Guangdong Huibo Robot Technology Co., Ltd.
"Construction of Intelligent Manufacturing Factory for Ceramic Bathroom Ware Based on Industrial Internet"
Wang Zhifeng pointed out in his speech: As workers in the industry have higher and higher requirements for the working environment, the increasingly fierce competition in the industry and the impact of Industry 4.0 have brought some new confusions to the intelligent manufacturing of sanitary ware. . Can current devices behave like humans? It is difficult, so at present, we can only make up our minds to adapt to the current equipment, collect overall operating data through various means, guide the equipment to perform predictive maintenance, and make corresponding personnel decisions. At the same time, he said: Enterprises must build a complete industrial Internet system, including an overall equipment control platform, a data collection platform, and an intelligent manufacturing system for industrial equipment. The real monitoring platform monitors all our equipment, all data collection and communication platforms, monitors the communication between various interlaced platforms, collects all automation for operation and maintenance platform evaluation and next step self-diagnosis, and can also realize the current intelligent gateway.
▲ Zhang Maiguan, technical director of Foshan Ceramic Research Institute Group Co., Ltd.
"Characteristics of new ceramic rollers and their application in ceramic production"
Zhang Maiguan will give you a report on the research on a new material of King Kong in recent years, mainly introducing the performance characteristics and application scope of the three new products. They are QF99 corrosion-resistant ceramic roller, SC98 ultra-low expansion ceramic roller, and GF98 ultra-high temperature ceramic roller. According to the requirements of product firing, these new roller products have the characteristics of corrosion resistance, large elastic modulus, high flexural strength, good high temperature stability, and low room temperature disturbance. The application of these new types of rollers in the ceramic industry provides a very good choice for the research and development and manufacturing of new products by ceramic companies, especially building ceramic companies.
▲Fang Yao, General Manager of the Technical Department of Guangdong Bohui Mechanical and Electrical Co., Ltd.
"Digital Fabric System and Intelligent Wet Method Case"
Fang Yao said: The development of the digital cloth system was inspired by the inkjet printing machine. It can spray out all pattern effects, but it is a flat surface effect, while 3D becomes a In one unified body, we integrated the two technologies to create the effect of bricks, which is similar to stone, wood and the like. The printer mainly produces in the form of pattern files. Its pattern files share the same file with the inkjet machine, press, and barcode machine for production.
▲Wu Jingnan, General Manager of Foshan Mihai Robot Automation Co., Ltd.
"Realization of Handling Robot (AGV) and Ceramic Smart Factory"
Wu Jingnan said: To realize Ceramic Industry 4.0, to put it simply, the entire process from a single fully automatic production line to the entire factory is fully automatic and fully intelligent, from the customer selecting a model and placing an order to the customer picking up the goods. It is automatically completed by the computer, and the delivery date can be checked in seconds, and the entire factory is intelligent. To realize Ceramic Industry 4.0, everything must be interconnected to form an intra-industry Internet of Things. This is a necessary condition. Each cargo has an ID card, AGV (unmanned robot), and 5G network.
▲Hu Culin, Technical Director of Guanghua Intelligent Equipment Co., Ltd.
"Application and Prospects of AGV Automatic Storage and Transportation System in Ceramic Industry"
Hu Conglin pointed out: AGV is a system. In addition to the AGV vehicles we see now, it also includes command and dispatch, communication, calling, and inventory management.It consists of management and other parts. "AGV is an unmanned vehicle. We are very fashionable now in the aspect of unmanned driving." Mr. Hu said that more and more people have paid attention to AGV in the past two years. The majority of ceramic people must first change their thinking. It just so happens that we are catching up with a winter in the ceramic industry. Since it is winter, it is very good to seize a period of time to carry out our technological transformation. After spring, we can welcome greater development in the spring.
Giving honors
▲ Enterprise Award for Promoting the Progress of New Materials, New Equipment and New Technologies in the Ceramic Industry
At the forum, leaders of the organizer expressed their opinions on Guangdong Keda Clean Energy Co., Ltd., Guangdong Bohui Mechanical and Electrical Co., Ltd., Foshan Ceramics Research Institute Group Co., Ltd., and Foshan Delitai Technology Co., Ltd. , Foshan Mairis Technology Co., Ltd., Guangdong Benlang New Materials Co., Ltd., Foshan Sanshui Yingjie Precision Machinery Co., Ltd., Foshan Hope Digital Printing Equipment Co., Ltd., Guangdong Zhongyao Kiln Industry Co., Ltd., Foshan Hengli Tai Machinery Co., Ltd., Guangdong Sanshui Dahong Glaze Co., Ltd., and Shandong Guoci Kanglitai New Material Technology Co., Ltd. issued the "Enterprise Award for Promoting the Progress of New Materials, New Equipment, and New Technologies in the Ceramic Industry".
▲Personal Award for Promoting the Progress of New Materials, New Equipment and New Technologies in the Ceramic Industry
At the forum, the leaders of the organizer spoke to You Ao, Zhang Zemin, Wu Zhen, Fang Yao, Zhang Maiguan, Wang Zhifeng, Peng Hu, Wu Jingnan, Hu Conglin, Zhang Yang Fan, Huang Huining, Jing Haishan, and Zheng Shulong presented the "Individual Award for Promoting the Progress of New Materials, New Equipment, and New Technologies in the Ceramic Industry".
▲The guests took a group photo
“New Materials, New Equipment and New Technology Forum in the Ceramic Industry” and the 2019 China (Foshan) Ceramic Equipment Manufacturing Advanced Technology Exchange Conference have come to a successful conclusion. This forum comprehensively and in-depth explored the technology of the entire ceramic manufacturing industry The new direction of innovation has played a leading role in promoting the rapid development of technology and equipment in the entire ceramic industry!
