Whether the exterior tile decoration looks good or not is just like a person’s appearance, it has a great influence on whether the makeup you wear looks good or not. In this era of looking at faces, why don’t you first look at the surface of the house? What about decoration? So what kind of tiles are best for exterior wall tiles? When the exterior wall tiles are decorated with mosaic tiles, what about the exterior wall mosaic tile decoration renderings? Let’s take a look together!
1. How to choose mosaic tiles
1. Hardness
As long as the hardness reaches the standard, the product will not be easily broken during use, and there will be no cracks after paving, so it will be more secure to use.
2. Look at the surface of the tiles
Check whether the mosaic glaze is uniform and intact, whether it is scratched or uneven.
3. Look at the slip resistance
Choose mosaic tiles with good anti-slip properties.
4. Look at the color of the mosaic
Standard ceramic mosaics have the same color, fresh texture and pattern, and no breakage.
2. Steps for laying mosaic tiles on exterior walls
1. Grassroots processing
Before construction, the cement exterior wall must be processed and the bulges on the surface must be smoothed. However, the surface of the exterior wall cannot be smoothed because it is not conducive to tile tiles, so it must be chiseled first and then Throw out fine cement mortar to make it water-brushed. After final setting, spray water for curing until the hardness is so hard that it cannot be broken by hand.
2. Plastering
Wall plastering is usually done twice. The first time is thinner, and the plastering should be squeezed firmly with a trowel. Use the same proportion of mortar to press the ribs and smooth it out, use a short scraper to smooth it, fill in the low spots, and finally use a wooden trowel to rub out the pitted surface, and then water and maintain it after final setting according to the temperature.
3. Wall elastic line
To determine the length and width of the building and the total length of the doors and windowsThe height is measured in advance, the width of the grid is planned according to the type of mosaic, and several horizontal lines are popped up and the grid strips are processed at the same time. Note that there must not be more than one row of non-solid bricks on the same wall, and they should be mounted in hidden areas.
4. Apply mosaic tiles
When we paste mosaics on the exterior wall, we must first coat the wet surface with cement mortar, and display each group of mosaics on the wooden pad. Fill the gaps with one to two dry cement sand, and use a brush to Brush off the floating sand on the surface, scrape a thin layer of cement slurry and stick it on. Typically, pasting mosaics is done from the bottom up.
5. Follow-up work
After pasting the mosaic, in the early stage of mortar solidification, wet the protective paper with tap water, and slowly tear off the paper with both hands. The direction of force when tearing off the paper should be parallel to the wall, and a metal dial should be used to hold it. Adjust the curved gaps to make them evenly spaced, and at the same time tap the wooden board on the mosaic to flatten it. Wait until the wall is completely dry and wipe it clean with a gel cloth.
3. How about the exterior wall mosaic tile decoration renderings
Hey, you can tell whether the decoration renderings are good or not by looking at the pictures! ! ! The effect is certainly more amazing than without exterior wall tiles!
The above content is the article that the editor shared with you about Exterior wall mosaic tile decoration renderings. I hope it can be helpful to you. That’s all for today’s content sharing. Get away! ! !
(The above pictures are all from the Internet, any infringement will be deleted)
